link to:<\/p>\n\n\n\n
<\/p>\n\n\n\n
Located in City of Santa Cruz, 330’AMSL, GridSquare CM96ax:<\/p>\n\n\n\n
K6BJ VHF 146.790- PL 94.8 (full time linked to K6RMW\/W 147.945- PL94.8 in Watsonville),
Analog FM voice, Allstarlink node 60216, Echolink K6BJ-R 354814<\/p>\n\n\n\n
K6BJ UHF 440.925+ PL 123.0 (not linked), Analog FM voice or networked digital: YSF Fusion, DSTAR, DMR, or P25<\/p>\n\n\n\n
K6BJ DSTAR mode 441.675+ DV, 1282.125- DV, 1288.000 DD, Repeater in Watsonville: Also located in City of Santa Cruz, GridSquare CM96ax:<\/p>\n\n\n\n K6BJ DeLa, HF internet remote, http:\/\/www.remotehams.com\/orb.html?id=11204<\/a><\/p>\n\n\n\n K6BJ-10 RMS Packet winlink 1200baud, 145.070 MHz<\/p>\n\n\n\n K6BJ-11 RMS Packet winlink 9600baud or VARA FM WIDE, 145.710 MHz<\/p>\n\n\n\n ..<\/p>\n\n\n\n K6BJ VHF 146.790- PL94.8 Capability:<\/p>\n\n\n\n The K6BJ VHF repeater is an analog FM repeater. In addition to FM, the repeater is capable of Allstar and Echolink and has a VOIP phone patch for local calls.<\/p>\n\n\n\n K6BJ VHF Repeater User Control Codes<\/p>\n\n\n\n Before using any of these features: Function Control Codes<\/strong> 769 Voltage Request: The repeater announces the current AC and battery voltages. 28* Signal Replay. Enter the 28* command and release PTT. The repeater prompts with Phone Patch<\/strong> *0 will hang-up. Please ID again when completed. Information on how to utilize the repeater functionality is also available in an interactive mode on the repeater itself.For help on using the K6BJ VHF repeater do the following: Allstar<\/strong> Allstar control codes are as follows (Please ID yourself before performing any DTMF commands): Echolink<\/strong> Please report repeater misuse or problems to John, N6QX, at <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n","protected":false},"excerpt":{"rendered":" link to: SCCARC Repeater Policy Repeater Frequencies Located in City of Santa Cruz, 330’AMSL, GridSquare CM96ax: K6BJ VHF 146.790- PL 94.8 (full time linked to K6RMW\/W 147.945- PL94.8 in Watsonville),Analog FM voice, Allstarlink node 60216, Echolink K6BJ-R 354814 K6BJ UHF 440.925+ …<\/p>\n
https:\/\/westnoc.weebly.com\/<\/a><\/p>\n\n\n\n
K6RMW\/W 147.945- PL 94.8 (full time link to K6BJ VHF 146.790- PL94.8)<\/p>\n\n\n\n
\u2022 Listen for at least 30 seconds to ensure the repeater is not in use.
\u2022 Identify.<\/p>\n\n\n\n
767 Time Request: The repeater announces what it believes is the current time.
768 Temperature Request: Repeater announces the current outside and equipment rack
temperatures.<\/p>\n\n\n\n
729 nnnnn DTMF Dial Pad Test, where nnnnn is between 1 and 16 digits on your tone dial pad. The
repeater will read back the digits you pressed. The letter \u2018D\u2019 on the
touchtone pad cannot be read back.<\/p>\n\n\n\n
\u201cReady.\u201d Press PTT and talk for up to 10 seconds, then release PTT. The repeater will play
back your received signal so you can hear the quality of your signal received by the repeater.<\/p>\n\n\n\n
*6 nnn nnn nnnn <10-digit telephone number with USA area code> will make a call.<\/p>\n\n\n\n
*6911 EMERGENCY. Calls the 9-1-1 Emergency Center.
Identify before and after transmitting DTMF tones on the repeater.<\/p>\n\n\n\n
ID yourself, then press: * 9 2 0<\/p>\n\n\n\n
The club hosts an AllStar node (#60216) instance on the K6BJ VHF repeater. The AllStar Link configuration is set up such that any user can connect to the repeater from it. We ask that you please be mindful of linking repeaters (especially high-traffic ones) to ours during reserved times (nets and event operations). Please refer to the list of the club nets.<\/p>\n\n\n\n
For link status, press: * 7 0
To connect with an AllStar node, press: * 3 <node number>
To disconnect from the last connected node, press: * 1 <node number>
To disconnect from a node , press: * 1 <node number>
To disconnect from all nodes, press: * 7 6
If you are traveling and are within range of an Allstar-enabled repeater, and with the repeater owner\u2019s permission, press the PTT button on your radio and press: * 3 60216, which will connect you to the K6BJ
VHF repeater node. Additionally, if you have a personal AllStar node, you can connect to the repeater through it. Please remember to disconnect when done by pressing: * 1 60216<\/p>\n\n\n\n
The club also hosts an Echolink node (K6BJ-R #354814).
It is possible to connect the K6BJ VHF repeater to another Echolink node.
Echolink control codes are as follows (Please ID yourself before performing any DTMF commands):
To connect with an echolink node, press: * 3 3 <echolink node number>
To disconnect, press: * 1 3 <echolink node number>
To disconnect from all nodes, press: * 7 6
Please identify before and after transmitting any DTMF tones on the repeater.<\/p>\n\n\n\n
den6qx@gmail.com<\/a>.<\/p>\n\n\n\n
\n\n\n\n
\n\n\n\n