K6BJ 2-Meter Repeater User Control Codes<\/p>\n
Rev 6 N6QX 12 Mar 2021<\/p>\n
Before using any of these features:
\n\u2022 Listen for at least 30 seconds to ensure the repeater is not in use.
\n\u2022 Identify.
\nPhone Patch
\n831 nnn nnnn Phone Patch dial command, where nnn nnnn is the telephone number to be called.
\n73 Hang up the phone. Please identify.
\n78911 EMERGENCY. Calls the 911 Emergency Center.
\n** Patch Extend. Resets phone patch time-out timer. May be sent at any time during a
\ncall. Should be sent immediately if you hear a warning beep during a long call.<\/p>\n
IRLP and Echolink
\nK6BJ is connected to IRLP Node 3318.
\n33 nnnn IRLP Connection Request, where nnnn is the IRLP node.
\n73 Ends the connection. Please identify.
\n*nnnnnn Echolink Connection Request, where nnnnn is the Echolink node.
\n73 Ends the connection. Please identify.<\/p>\n
Function Control Codes
\n767 Time Request: The repeater announces what it believes is the current time.
\n768 Temperature Request: Repeater announces the current outside and equipment rack<\/p>\n
temperatures.<\/p>\n
769 Voltage Request: The repeater announces the current AC and battery voltages.
\n729 nnnnn DTMF Dial Pad Test, where nnnnn is between 1 and 16 digits on your tone dial pad. The
\nrepeater will read back the digits you pressed. The letter \u2018D\u2019 on the touchtone pad cannot be
\nread back.<\/p>\n
28* Signal Replay. Enter the 28* command and release PTT. The repeater prompts with
\n\u201cReady.\u201d Press PTT and talk for up to 10 seconds, then release PTT. The repeater will play
\nback your received signal so you can hear the quality of your signal received by the
\nrepeater.<\/p>\n
Pleased report repeater problems to John, N6QX, at den6qx@gmail.com.<\/p>\n","protected":false},"excerpt":{"rendered":"
K6BJ 2-Meter Repeater User Control Codes Rev 6 N6QX 12 Mar 2021 Before using any of these features: \u2022 Listen for at least 30 seconds to ensure the repeater is not in use. \u2022 Identify. Phone Patch 831 nnn nnnn …<\/p>\n