SCCARC Repeater Policy
Repeater Frequencies
Located in City of Santa Cruz, 330’AMSL, GridSquare CM96ax:
K6BJ VHF 146.790- PL 94.8 (full time linked to K6RMW/W 147.945- PL94.8 in Watsonville),
Analog FM voice, Allstarlink node 60216, Echolink K6BJ-R 354814
K6BJ UHF 440.925+ PL 123.0 (not linked), Analog FM voice or networked digital: YSF Fusion, DSTAR, DMR, or P25
K6BJ DSTAR mode 441.675+ DV, 1282.125- DV, 1288.000 DD,
https://westnoc.weebly.com/
Repeater in Watsonville:
K6RMW/W 147.945- PL 94.8 (full time link to K6BJ VHF 146.790- PL94.8)
Also located in City of Santa Cruz, GridSquare CM96ax:
K6BJ DeLa, HF internet remote, http://www.remotehams.com/orb.html?id=11204
K6BJ-10 RMS Packet winlink 1200baud, 145.070 MHz
K6BJ-11 RMS Packet winlink 9600baud or VARA FM WIDE, 145.710 MHz
..
K6BJ VHF 146.790- PL94.8 Capability:
The K6BJ VHF repeater is an analog FM repeater. In addition to FM, the repeater is capable of Allstar and Echolink and has a VOIP phone patch for local calls.
K6BJ VHF Repeater User Control Codes
Before using any of these features:
• Listen for at least 30 seconds to ensure the repeater is not in use.
• Identify.
Function Control Codes
767 Time Request: The repeater announces what it believes is the current time.
768 Temperature Request: Repeater announces the current outside and equipment rack
temperatures.
769 Voltage Request: The repeater announces the current AC and battery voltages.
729 nnnnn DTMF Dial Pad Test, where nnnnn is between 1 and 16 digits on your tone dial pad. The
repeater will read back the digits you pressed. The letter ‘D’ on the
touchtone pad cannot be read back.
28* Signal Replay. Enter the 28* command and release PTT. The repeater prompts with
“Ready.” Press PTT and talk for up to 10 seconds, then release PTT. The repeater will play
back your received signal so you can hear the quality of your signal received by the repeater.
Phone Patch
*6 nnn nnn nnnn <10-digit telephone number with USA area code> will make a call.
*0 will hang-up. Please ID again when completed.
*6911 EMERGENCY. Calls the 9-1-1 Emergency Center.
Identify before and after transmitting DTMF tones on the repeater.
Information on how to utilize the repeater functionality is also available in an interactive mode on the repeater itself.For help on using the K6BJ VHF repeater do the following:
ID yourself, then press: * 9 2 0
Allstar
The club hosts an AllStar node (#60216) instance on the K6BJ VHF repeater. The AllStar Link configuration is set up such that any user can connect to the repeater from it. We ask that you please be mindful of linking repeaters (especially high-traffic ones) to ours during reserved times (nets and event operations). Please refer to the list of the club nets.
Allstar control codes are as follows (Please ID yourself before performing any DTMF commands):
For link status, press: * 7 0
To connect with an AllStar node, press: * 3 <node number>
To disconnect from the last connected node, press: * 1 <node number>
To disconnect from a node , press: * 1 <node number>
To disconnect from all nodes, press: * 7 6
If you are traveling and are within range of an Allstar-enabled repeater, and with the repeater owner’s permission, press the PTT button on your radio and press: * 3 60216, which will connect you to the K6BJ
VHF repeater node. Additionally, if you have a personal AllStar node, you can connect to the repeater through it. Please remember to disconnect when done by pressing: * 1 60216
Echolink
The club also hosts an Echolink node (K6BJ-R #354814).
It is possible to connect the K6BJ VHF repeater to another Echolink node.
Echolink control codes are as follows (Please ID yourself before performing any DTMF commands):
To connect with an echolink node, press: * 3 3 <echolink node number>
To disconnect, press: * 1 3 <echolink node number>
To disconnect from all nodes, press: * 7 6
Please identify before and after transmitting any DTMF tones on the repeater.
Please report repeater misuse or problems to John, N6QX, at
den6qx@gmail.com.