SCCARC Repeater Policy
Repeater Frequencies
K6BJ VHF 146.790- PL 94.8 (full time link to K6RMW/W 147.945-),
Allstarlink node 60216, Echoliink K6BJ-R
K6BJ UHF 440.925+ PL 123.0 (not linked), analog FM voice or networked
digital: YSF Fusion, DSTAR, DMR, or P25
K6BJ DSTAR 441.675+ DV, 1282.125- DV, 1288.000 DD,
https://westnoc.weebly.com/
Repeater in Watsonville:
K6RMW/W 147.945- PL 94.8 (full time link to K6BJ VHF 146.790-)
Also in Santa Cruz City:
K6BJ DeLa, HF internet remote, http://www.remotehams.com/orb.html?id=11204
K6BJ-10 RMS Packet winlink 1200baud, 145.070 MHz
K6BJ-11 RMS Packet winlink 9600baud or VARA FM, 145.710 MHz
..
K6BJ VHF 146.790- Capability:
The K6BJ VHF repeater is an analog FM repeater. In addition to FM, the
repeater is capable of Allstar and Echolink. Information on how to
utilize the repeater functionality is also available in an interactive
mode on the repeater itself.
For help on using the K6BJ VHF repeater do the following:
ID yourself, then press: * 9 2 0
Allstar
The club hosts an AllStar node (#60216) instance on the K6BJ VHF repeater. The AllStar Link configuration is set up such that any user can connect to the repeater from it. We ask that you please be mindful of linking repeaters (especially high-traffic ones) to ours during reserved times (nets and event operations). Please refer to the list of the club nets.
Allstar control codes are as follows (Please ID yourself before performing any DTMF commands):
For link status, press: * 7 0
To connect with an allstar node, press: * 3 <node number>
To disconnect from the last connected node, press: * 1 <node number>
To disconnect from a node , press: * 1 <node number>
To disconnect from all nodes, press: * 7 6
If you are traveling and are within range of an Allstar-enabled repeater, and with the repeater owner’s permission, press the PTT button on your radio and press: * 3 60216, which will connect you to the KN6GWQ VHF repeater node. Additionally, if you have a personal AllStar node, you can connect to the repeater through it. Please remember to disconnect when done by pressing: * 1 60216
Echolink
The club also hosts an Echolink node (K6BJ-R #354814).
It is possible to connect the K6BJ VHF repeater to another Echolink node. Echolink control codes are as follows (Please ID yourself before performing any DTMF commands):
To connect with an echolink node, press: * 3 3 <echolink node number>
To disconnect, press: * 1 3 <echolink node number>
To disconnect from all nodes, press: * 7 6